Condition Monitoring Documents
CERTIFICATION SERVICES DIVISION

PSL 8A CM Issue 32: Dated 1st January 2013

PSL/8A is revised at quarterly intervals and details the current status of all PCN published documents. It is circulated automatically to personnel and organisations listed on document PSL/8B – holders of controlled PCN documents – under cover of a transmittal note. A vertical line in the left margin adjacent to the document concerned indicates changes to a document’s issue status. Withdrawn documents should be destroyed or clearly marked on each page 'WITHDRAWN' or 'SUPERSEDED'. 

Any of the documents referenced herein, except those for PCN internal use, may be obtained from the Certification Services Division at The British Institute of NDT, and many of them may be obtained directly from any PCN Authorised Qualifying Body. Revised, amended or re-issued documents will automatically be sent to members of the PCN Registered Update Scheme. For details please contact the Certification Services Division. 

Holders and recipients of documents who do not subscribe to the PCN Registered Update Scheme are advised to check the status of any documents they hold before use. PCN cannot be held responsible for the update of any documentation acquired outside of the update scheme.

A downloadable version of PSL 8A CM is available here in PDF format.


REFERENCE ISSUE DATE CONSTITUTIONAL DOCUMENTS
PCN 5CM 1 28.09.04 PCN CM Scheme Ad Hoc Certification Panel (for internal use only)
REFERENCE ISSUE DATE PERSONNEL CERTIFICATION REQUIREMENTS
CM GEN

2 rev D 01.01.13 General requirements for qualification and certification of Condition Monitoring and diagnostic personnel
Appendix A

2 rev C 01.01.13 Specific requirements for qualification and certification of Condition Monitoring and diagnostic personnel for Acoustic Emission
Appendix B

2 rev C 01.01.13 Specific requirements for qualification and certification of Condition Monitoring and diagnostic personnel for Infrared Thermography
Appendix C 
2 rev D 01.01.13 Specific requirements for qualification and certification of Condition Monitoring and diagnostic personnel for Lubrication Management and Analysis
Appendix D

3 01.01.13 Specific requirements for qualification and certification of Condition Monitoring and diagnostic personnel for Vibration Analysis
MMCMP 1 rev B
01.04.09
General requirements for the qualification and assessment of Marine Machinery Condition Montoring personnel
Appendix A
1 rev E

01.01.10
Specific requirements for the qualification and assessment of Marine Machinery Condition Monitoring personnel
REFERENCE ISSUE DATE STANDARD PCN FORMS AND INFORMATION SHEETS
PSL 4 CM

27 rev A 01.07.12 Condition Monitoring examination availability

PSL 5CM
           

THIS DOCUMENT IS NOW WITHDRAWN. 
PLEASE REFER TO THE ACC-LIST-CMM BELOW


ACC-LIST-CMM

65 01.01.13 List of CM & Marine BINDT Training Organisations
PSL 18 CM-Marine

1 rev C 01.01.09 Application for duplicate PCN CM or Marine CM certificate and/or wallet card
PSL 28 CM-Marine

1 rev D 01.01.13 Applications for late or deferred renewal or recertification in condition monitoring or Marine-CM
PSL 30 CM-Marine

6 rev A 01.04.10 Log of pre-certification experience – CM-Marine
PSL 33 CM-Marine

1 rev D 01.01.09 Verification of Identity
PSL 35 CM

9 01.01.13 Charges for certification services in condition monitoring
PSL 53 CM-Marine 
10 01.01.13

Frameable cert application

PSL 57 CM-Marine
3 rev B 01.01.3

Application for initial examination in condition monitoring or Assessment for certification in Marine MMCM

PSL 62 CM-Marine 
2 rev J 01.01.09

Invigilation of PCN condition monitoring examinations or Marine assessments

PSL 63 CM-Marine
6 01.01.13

Application for approval as a BINDT Approved Examination Centre

PSL 65 CM-Marine
01.10.11 Requirements, specifications and procedures for  administration of PCN CM and Marine examinations
REFERENCE ISSUE DATE CENTRAL PAPERS
CP 16 CM

1 rev B 01.01.13  Renewal and recertification of CM certificates