NDT 2010: Programme 16 September
Provisional programme – subject to change


Thursday 16 September
09.00
Registration
09.15 Plenary Paper – Technology Transfer
Implementation of new NDT technologies: Flash thermography, T Barden, Rolls Royce plc

Session 5A – Long-range ultrasonics / Guided waves
Chair – Dr A Croxford

Session 5B – EMATS
Chair – Dr R Edwards

Session 5C – Applications
Chair – Mr C Bird
09.45
The reflection of guided waves from simple supports in pipes
A Galvagni and P Cawley
Department of Mechanical Engineering, Imperial College
Measurements of in-plane and out-of-plane Rayleigh wave velocity components using EMATs
M Rosli, B Dutton and R S Edwards Department of Physics,
University of Warwick
The HOIS recommended practice for in-service computed radiography of pipes
S F Burch
ESR Technology Ltd
10.10
Detecting and locating axial defects in pipes using circumferential guided waves
S Fletcher
Imperial College
In-line signal averager for use with EMATs in NDT applications
M D G Potter1,2, Y Fan1,2, D Greenshields2 and S Dixon2
1Sonemat Limited,
2Department of Physics, University of Warwick
Digital Radiography for High Energy NDT Applications
Ron Pincu, NDT Division Manager - Vidisco Ltd
10.35
Improvements on high-temperature EMAT with pulsed electromagnet
F Hernandez-Valle and S Dixon
Department of Physics, University of Warwick

Monitoring and fault diagnostic of CNG cylinder by an automatic ultrasonic scanner
Dr Babakhani
11.00
Tea and Coffee

Session 6A – Long-range ultrasonics / Guided waves (cont’d)
Chair – Dr A Croxford
Session 6B – Electromagnetics NDT
Chair – Dr S Dixon
Session 6C – Applications (cont’d)
Chair – Mr C Bird

11.15
Guided wave inspection of pipes containing bends
R Sanderson
TWI Ltd


Development of a scanning system to detect corrosion in wire bundles and pipes using magnetoresistive sensors
V Torres, S Quek, B Fernandes and
P Gaydecki
University of Manchester

Ultrasonic focused transducer for inspection of small diameter thin-walled pipe welds
A S Annenkov, O A Mitrofanov and
O N Shcherbakov
11.40
SHM of large structures using guided ultrasonic waves for fatigue crack detection
P Fromme
Department of Mechanical Engineering, University College London
Comparative study of eddy current phase and eddy current frequency methods of thickness measurement of electrically conductive non-ferromagnetic coatings on electrically conductive non-ferromagnetic substrates
V A Syasko, A Ivkin and I V Pilatova
Constanta Ltd, Russia
Videoprobe developments – phase measurement, a replacement for stereo
R Evans, G E Inspection Technologies

12.05
Long-range ultrasonic testing of ageing aircraft wiring
V Dimlaye
TWI Ltd
Recent research and development activities in electromagnetic sensor technologies
B Blakeley
TSC Inspection Systems
Ultrasonic inspection through CVCS nozzle weld with flexible array
O Paris, O Casul and, P Calmon, CEA LIST, France, L Roumilly, EdF-Ceidre, France and B Chassignole, EDF R&D, France
12.30

Recent developments in the M-skip technique for the inspection of wall loss flaws in inaccessible components"
S F Burch, N J Collett and H R Peramatzis

 

Pulsed eddy current detection of corrosion on coated steel plates
M Alamin, G Y Tian and M Morozov
School of Electrical, Newcastle University
Non-contact characterisation of conductivity gradient in isotropic polycrystalline graphite using inductance spectroscopy measurements
B.Dekdouk, R.Chapman, M.Brown, C.Ktistis, D.Armitage and A.J.Peyton
12.55
THIS TIME SLOT IS AVAILABLE FOR LATE SUBMISSIONS

THIS TIME SLOT IS AVAILABLE FOR LATE SUBMISSIONS
Application of acoustic time-frequency domain imaging for the evaluation of advanced microelectronic packages
Guang-Ming Zhang and David M. Harvey, Liverpool John Moores University, Derek R. Braden
Delphi Electronics and Safety.
13.20
Conference Close - Roald Dahl Suite
Hot - Tempus Restaurant