| ||
| Address: | Technology Centre, Ratcliffe-on-Soar, Nottingham NG11 0EE | |
| Telephone: | +44 (0)2476 192313 | |
| Fax: | +44 (0)115 9024003 | |
| Contact: | Dr Colin R Brett, Technical Head of Inspection Management | |
| Email Address: | colin.brett@eon-engineering.com | |
| Web Address: | www.eon-uk.com/about/technology | |
| NDT Methods: | C - Coating Thickness Measurement | |
| E - Electromagnetic General | ||
| E2 - Magnetic Flux Leakage methods | ||
| E3 - Eddy Current Testing | ||
| E4 - ACFM | ||
| E5 - Potential Drop Flaw Detection and Sizing | ||
| EC - Erosion/Corrosion | ||
| LP - Liquid Penetrant Inspection | ||
| O - Optical Methods General | ||
| O1 - Visual Inspection | ||
| O2 - Optical Metrology and Holography | ||
| O4 - Thermography | ||
| R - Radiography General | ||
| S - Stress Measurement | ||
| U - Ultrasonic General | ||
| U1 - Ultrasonic Flaw Detection and Sizing | ||
| U2 - Ultrasonic Thickness Gauging | ||
| U3 - Ultrasonic advanced methods (TOFD | ||
| phased array | ||
| etc) | ||
| Z - Other methods | ||
| Description: | E.ON Engineering provides a comprehensive range of NDT, condition monitoring, metallurgical, and plant life assessment services. NDT Capabilities With over 25 years of experience inspecting power plant we have established a high-quality NDT service based on strong technical foundations, supported by metallurgical and assessment engineers who can advise on the significance of the results on future operation. We can help you in the following areas: NDT Contract Management: provision of a complete NDT contract management service during plant overhauls that is tailored to the needs of customers. Audit and Surveillance of NDT Contracts: to ensure that NDT is carried out by qualified staff to approved procedures. This service includes advice on remedial actions and can be performed on site or in manufacturers' works. Consultancy: Our extensive experience of the application of NDT enables us to offer consultancy in inspection design and NDT procedure development. Inspection Services: all inspection methods employed are carried out by staff qualified to the highest standards in NDT. Relevant background knowledge of the engineering and metallurgical nature of the inspection ensures that the optimum technique is applied. Condition Monitoring Capabilities E.ON UK Technology provides a comprehensive range of condition monitoring services – adding value through our extensive engineering expertise and the use of remote data acquisition and expert system analysis. The Condition Monitoring services can be used to determine the health of turbines, transformers, generators and motors, heat exchange surfaces, fans, pumps, mills, gearboxes, insulation and linings. E.ON Engineering is accredited to BS EN ISO 9001 and 14001. | |
| Affiliations & Approvals: | ISO 9001 | |
| ISO 14001 | ||
Back
