Programme 10 September 2018

 



Sunday 9 September
16.00
ISCM Management Committee Meeting
16.00-19.00Registration – Room: Conference Centre Foyer
19.00-21.00 Welcome Buffet – Room: Atrium

Monday 10 September
08.00Registration – Room: Conference Centre Foyer
Tea, Coffee and Exhibition – Room: Banqueting Suite
09.00-09.10 Opening Ceremony – Chair: C Bull, President of BINDT
Room: Conference Theatre

09.10-09.40The President's Honour Lecture: Infrared thermography for CM and NDT
T Clausing, USA

Chair: C Bull, President of BINDT
Room: Conference Theatre

09.40-09.50 BINDT Update
D Gilbert, CEO of BINDT
, UK
Chair: C Bull, President of BINDT
Room: Conference Theatre

 09.50-10.00PCN Book Update
Professor A Hope, Southampton Solent University, UK
Chair: C Bull, President of BINDT
Room: Conference Theatre 
10.00-10.30
Tea, Coffee and Exhibition – Room: Banqueting Suite
10.30-12.40PCN Update
N Banks, BINDT
Room: 4A

  Session 1A: Trained structures and statistical
methods in condition monitoring


Chair: Professor L Kuravsky
Room: Gallery 2
Session 1B – Novel monitoring application



Chair: Professor S Noroozi
Room: Gallery 1
Session 1C – Vibration signal analysis



Chair: Professor A Hope
Room: 1A
10.30-10.50[129] Approaches to assessing the skills of operators of complex technical systems

L S Kuravsky and G A Yuryev
Moscow State University of Psychology and Education, Russia

[102] Sensorless control of a novel stepped hydraulic flow control valve

K Abuowda1, S Noroozi1, M Dupac1 and P Godfrey2
1Bournemouth University, UK
2Hydreco Hydraulics Ltd, UK


[103] Invited overview presentation: Vibration signal analysis methods for planetary gearbox fault diagnostics

F Chu
Tsinghua University, China


10.50-11.10[104] Dimensionality reduction with aid of stochastic swarm clusterisation method

G Yuryev, E K Verkhovskaya and N E Yuryeva
Moscow State University of Psychology and Education, Russia

[105] Corrosion prediction algorithm and condition monitoring system for efficient diagnosis and prognosis of high-value mobile and stationary assets

J Latif and Z A Khan
Bournemouth University, UK
[106] Detection of rolling element bearing defects

D Whittle
RMS Ltd, UK


11.10-11.30[107] Self-learning adaptive training procedure for condition monitoring personnel

L S Kuravsky, A A Margolis, G A Yuryev and G A Pominov
Moscow State University of Psychology and Education, Russia

[108] Real-time interfacial load monitoring and tracking between the composite prosthetic socket and residual limb for below-knee amputees

N Aslani, S Noroozi, P Davenport and K Abuowda
Bournemouth University, UK
[109] THIS SLOT IS AVAILABLE FOR A LATE SUBMISSION

11.30-11.40
Ten-Minute Comfort Break and Exhibition – Room: Banqueting Suite
11.40-12.00[110] Monitoring the dangerous activity of computer network users

L S Kuravsky1, G A Yuryev1, P V Scribtsov2, M A Chervonenkis2, A A Konstantinovsky1, A A Shevchenko1 and S S Isakov1
1Moscow State University of Psychology and Education, Russia
2PAWLIN Technologies, Russia

[111] Kinematics study of the deltoid in reverse shoulder arthroplasty using standard pre- and post-operative X-rays

N Aslani, S Noroozi, R Hartley, A Harvey and P Sewell
Bournemouth University, UK









12.00-12.20[113] Convolutional feature extraction from human computer interaction data in behavioural biometric

G Yuryev
Moscow State University of Psychology and Education, Russia

[114] Friction analysis and modelling of a novel stepped rotary flow control valve

K Abuowda1, I Okhotnikov1, S Noroozi1 and P Godfrey2
1Bournemouth University, UK
2Hydreco Hydraulics Ltd, UK

12.20-12.40
[116] On an approach to adaptive testing in psychological measurements

L S Kuravsky, S L Artemenkov and G A Yuryev
Moscow State University of Psychology and Education, Russia

[117] A novel technique of detecting CUI based on electrical impedance spectroscopy and the results of its application from a 15-month long field trial in Norway

G Diamond, K Kyeyune, P Kubasiak, P Gugutkov and S Bozikis
Inspection Technologies Ltd

12.40-13.40
Lunch and Exhibition – Room: Banqueting Suite
13.00-13.40
International Scientific Advisory Committee Meeting (working lunch by invitation only) – Room: Gallery 2
13.40-14.10Plenary Keynote Lecture [119] Acoustic sensing for buried pipe infrastructure
Professor K Horoshenkov, UK
Chair: Professor L Gelman
Room: Gallery 2


Session 2A – Trained structures and statistical methods in condition monitoring

Chair: Professor L Kuravsky
Room: Gallery 2
Session 2C – Machine learning



Chair: S Greenfield
Room: 1A







14.10-14.30[120] Forecasting behaviour of a stochastic multi-agent system

L S Kuravsky and S I Popkov
Moscow State University of Psychology and Education, Russia

[122] Power curve modelling using support vector machine and its accuracy dependence on kernel scale

R K Pandit and D Infield
University of Strathclyde, UK

14.30-14.50
[123] On the connection between precession and the nature of stress changes at forced oscillations of the shaft-line

A I Kumenko
Dynamics SPC, Russia
[125] Investigating different structures for mapping sensor information of a complex mechanical system to its health status

A Mahmoodian, M Durali and M Saadat
Sharif University of Technoloogy, Iran

14.50-15.10
[126] Forecasting aviation accidents with the aid of probabilistic models

P N Dumin and D A Pominov
Moscow State University of Psychology and Education, Russia
[128] Pump cavitation detection through fusion of support vector machine classifier data associated with vibration and motor current signature

B Yari1 and M S Safizadeh2
1Shahrood University of Technology, Iran
2Iran University of Science and Technology, Iran

15.10-15.40
Tea, Coffee and Exhibition – Room: Banqueting Suite

Session 3A – Trained structures and statistical methods in condition monitoring

Chair: Professor L Kuravsky
Room: Gallery 2
Session 3B – NDT and SHM methods



Chair: Professor V Troitskiy
Room: Gallery 1

Session 3C – Signal processing, ICT and condition monitoring


Chair: Professor R Smid
Room: 1A
15.40-16.00
[101] Application of the method of patterns in condition monitoring

L S Kuravsky, G A Yuriev, D A Pominov and N Y Yurieva
Moscow State University of Psychology and Education, Russia

[130] Non-contact measurement of run-out and torque in rotating shafts using enhanced function rotary encoders

D Orton
Gyrometric Systems, UK

[131] Edge computing and machine condition monitoring

R Smid
Czech Technical University in Prague, Czech Republic

16.00-16.10
[132] Use cases of blockchain cryptographic hash functions for ensuring data monitoring integrity

A V Kulakov, V R Milov and A V Semashko
Nizhny Novgorod State Technical University, Russia

[133] Opportunities of X-ray testing without intermediate data carriers of information

V A Troitskiy
The E O Paton Electric Welding Institute, National Academy of Sciences of Ukraine

[134] Managing your supply chain must include monitoring of the effective delivery of energy

J Butler
EA Technology Ltd, UK

16.20-16.40
[135] About effect of shaft unbalance and supports misalignments to the border of rotation stability of the experimental four support shaft

A I Kumenko, A V Timin, N Y Kuzminykh and S V Medvedev
Dynamics SPC, Russia 

[136] Structural material damage monitoring under variable loading at surface deformation defect density

A Maylo and G Pisarenko
Institute for Problems of Strength, National Academy of Sciences of Ukraine

[137] Research on spectrum components of planetary gearbox vibration signals by dynamic modelling and filtering

L Zhang, N Hu and Z Cheng
National University of Defense Technology, China

16.40
18.00
Conference close for the day
Evening eventNottingham National Justice Museum

To view the programme for Tuesday 11 September 2018, click here and to view the programme for Wednesday 12 September 2018, click here.

For further information contact: Conferences and Events Department, The British Institute of Non-Destructive Testing,
Midsummer House, Riverside Way, Bedford Road, Northampton NN1 5NX, UK.
Tel: +44 (0)1604 438300; Fax: +44 (0)1604 438301; Email: cm_mfpt@bindt.org; Web: www.cm-mfpt.org