Radiographic Testing (RТ)

Non-destructive testing  

 BS, EN and BS EN
ISO
General provisions
BS EN ISO 5579:2013 Non-destructive testing – Radiographic testing of metallic materials using film and X- or gamma rays – Basic rules
ISO 5579:2013 Non-destructive testing – Radiographic testing of metallic materials using film and X- or gamma rays – Basic rules
BS EN 13068-3:2001 Non-destructive testing – Radioscopic testing – Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays

Equipment and tools
BS EN ISO 11699-1:2011 Non-destructive testing – Industrial radiographic film – Part 1: Classification of film systems for industrial radiography
ISO 11699-1:2008 Non-destructive testing – Industrial radiographic film – Part 1: Classification of film systems for industrial radiography
BS EN ISO 11699-2:2011 Non-destructive testing – Industrial radiographic films – Part 2: Control of film processing by means of reference values
ISO 11699-2:1998 Non-destructive testing – Industrial radiographic films – Part 2: Control of film processing by means of reference values
BS EN 25580:1992 Non-destructive testing – Industrial radiographic illuminators – Minimum requirements 
ISO 5580:1985 Non-destructive testing – Industrial radiographic illuminators – Minimum requirements
BS EN 14096-1:2003 Non-destructive testing – Qualification of radiographic film digitisation systems – Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
ISO 14096-1:2005 Non-destructive testing – Qualification of radiographic film digitisation systems – Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
BS EN ISO 14096-2:2003 Non-destructive testing – Qualification of radiographic film digitisation systems – Part 2: Minimum requirements
ISO 14096-2:2005 Non-destructive testing – Qualification of radiographic film digitisation systems – Part 2: Minimum requirements
BS EN 12544-1:1999 Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 1: Voltage divider method
ISO 16526-1:2011 Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 1: Voltage divider method
BS EN 12544-2:2000 Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 2: Constancy check by the thick filter method ISO 16526-2:2011 Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 2: Constancy check by the thick filter method
BS EN 12544-3:1999 Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 3: Spectrometric method
ISO 16526-3:2011 Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 3: Spectrometric method
BS EN 12543-1:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 1: Scanning method
 
BS EN 12543-2:2008 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 2: Pinhole camera radiographic method
 
BS EN 12543-3:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 3: Slit camera radiographic method
 
BS EN 12543-4:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 4: Edge method
 
BS EN 12543-5:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 5: Measurement of the effective focal spot size of mini- and micro-focus X-ray tubes
 
BS EN 12679:2000 Non-destructive testing – Determination of the size of industrial radiographic sources – Radiographic method
 
Image quality
 

 ISO 16371-1:2011 Non-destructive testing – Industrial computed radiography with storage phosphor imaging plates – Part 1: Classification of systems
 ISO 16526-1:2011 Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 1: Voltage divider method 
 ISO 16526-2:2011 Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 2: Constancy check by the thick filter method
 ISO 16526-3:2011 Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 3: Spectrometric method
BS EN ISO 19232-1:2013 Non-destructive testing – Image quality of radiographs – Part 1: Determination of the image quality value using wire-type image quality indicators
ISO 19232-1:2013 Non-destructive testing – Image quality of radiographs – Part 1: Determination of the image quality value using wire-type image quality indicators
BS EN ISO 19232-2:2013 Non-destructive testing – Image quality of radiographs – Part 2: Determination of the image quality value using step/hole-type image quality indicators
ISO 19232-2:2013 Non-destructive testing – Image quality of radiographs – Part 2: Determination of the image quality value using step/hole-type image quality indicators
BS EN ISO 19232-3:2013 Non-destructive testing – Image quality of radiographs – Part 3: Image quality classes
ISO 19232-3:2013 Non-destructive testing – Image quality of radiographs – Part 3: Image quality classes
BS EN ISO 19232-4:2013 Non-destructive testing – Image quality of radiographs – Part 4: Experimental evaluation of image quality values and image quality tables
ISO 19232-4:2013 Non-destructive testing – Image quality of radiographs – Part 4: Experimental evaluation of image quality values and image quality tables
BS EN ISO 19232-5:2013 Non-destructive testing – Image quality of radiographs – Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators
ISO 19232-5:2013 Non-destructive testing – Image quality of radiographs – Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators
Special techniques
BS EN 14784-1:2005 Non-destructive testing – Industrial computed radiography with storage phosphor imaging plates – Part 1: Classification of systems
ISO 16371-1:2011 Non-destructive testing – Industrial computed radiography with storage phosphor imaging plates – Part 1: Classification of systems
BS EN 14784-2:2005 Non-destructive testing – Industrial computed radiography with storage phosphor imaging plates – Part 2: General principles for testing of metallic materials using X-rays and gamma rays
 
 ISO 15708-1 Non-destructive testing – Radiation methods – Computed tomography – Part 1: Principles, equipment and samples. 
 ISO 15708-2 Non-destructive testing – Radiation methods – Computed tomography – Part 2: Operation and interpretation 
BS EN 16407-1:2014 Non-destructive testing – Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays – Part 1: Tangential radiographic inspection
BS EN 16407-2:2014 Non-destructive testing – Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays – Part 2: Double wall radiographic inspection
 
Aerospace
prEN 2002-21 Aerospace series – Test methods for metallic materials – Part 21: Radiographic testing of cast components
Under Drafting

 
Castings (c)
 
BS EN 12681:2003 Founding – Radiographic examination

 ISO 4993:2015 Steel and iron castings – Radiographic inspection 
Welds (w)
 
BS EN ISO 17636-1:2013 Non-destructive testing of welds – Radiographic testing – Part 1: X- and gamma ray techniques with film
ISO 17636-1:2013 Non-destructive testing of welds – Radiographic testing – Part 1: X- and gamma ray techniques with film
BS EN ISO 17636-2:2013 Non-destructive testing of welds – Radiographic testing – Part 2: X- and gamma ray techniques with digital detectors
ISO 17636-2:2013 Non-destructive testing of welds – Radiographic testing – Part 2: X- and gamma ray techniques with digital detectors
BS EN ISO 10675-1:2013 Non-destructive testing of welds – Acceptance levels for radiographic testing – Part 1: Steel, nickel, titanium and their alloys
prEN ISO 10675-1 rev Under Approval
ISO 10675-1:2008 Non-destructive testing of welds – Acceptance levels for radiographic testing – Part 1: Steel, nickel, titanium and their alloys
BS EN ISO 10675-2:2013 Non-destructive testing of welds – Acceptance levels for radiographic testing – Part 2: Aluminium and its alloys
ISO 10675-2:2010 Non-destructive testing of welds – Acceptance levels for radiographic testing – Part 2: Aluminium and its alloys
Tubes and pipes (t)
 
BS EN ISO 10893-6:2011 Non-destructive testing of steel tubes – Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfectionsISO 10893-6:2011 Non-destructive testing of steel tubes – Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
 
Terminology
BS EN 1330-3:1997 Non-destructive testing – Terminology – Part 3: Terms used in industrial radiographic testing
ISO 5576:1997 Non-destructive testing – Industrial X-ray and gamma ray radiology –Vocabulary
BS EN 1330-11:2007 Non-destructive testing – Terminology – Terms used in X-ray diffraction from polycrystalline and amorphous materials
 
 BS 2737:1956 Terminology of internal defects in castings as revealed by radiography