2. Applications Standards
The following subjects are included in this section and can be accessed directly by the links below to navigate to the preferred area of interest.
Some of the standards listed are under review and may be revised in due course. These are indicated with an asterisk, thus *.
Some of the standards listed are under review and may be revised in due course. These are indicated with an asterisk, thus *.
Some of the standards listed are under review and may be revised in due course. These are indicated with an asterisk, thus *.
Some of the standards listed are under review and may be revised in due course. These are indicated with an asterisk, thus *.
Some of the standards listed are under review and may be revised in due course. These are indicated with an asterisk, thus *.
Some of the standards listed are under review and may be revised in due course. These are indicated with an asterisk, thus *.
| 2.1 Non-destructive testing of metallic welds | ||
| BS M 42:1972 Methods for non-destructive testing of fusion and resistance welds in thin gauge materials BS EN 1971-1:2019 Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubes. Test with an encircling test coil on the outer surface BS EN 1971-2:2019 Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubes. Test with an internal probe on the inner surface BS EN ISO 4136:2022 Destructive tests on welds in metallic materials. Transverse tensile test BS EN ISO 5173:2010 + A1:2011* Destructive tests on welds in metallic materials. Bend tests BS EN ISO 5817:2014* Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections BS EN ISO 6520-1:2007 Welding and allied processes. Classification of geometric imperfections in metallic materials. Fusion welding BS EN ISO 7963:2010* Non-destructive testing. Ultrasonic testing. Specification for calibration block No 2 BS EN ISO 9017:2018 Destructive tests on welds in metallic materials. Fracture tests BS EN ISO 10042:2018 Welding. Arc-welded joints in aluminium and its alloys. Quality levels for imperfections BS EN ISO 10675-1:2021 Non-destructive testing of welds. Acceptance levels for radiographic testing. Steel, nickel, titanium and their alloys BS EN ISO 10675-2:2021 Non-destructive testing of welds. Acceptance levels for radiographic testing. Aluminium and its alloys BS EN ISO 10863:2020 Non-destructive testing of welds. Ultrasonic testing. Use of time-of flight diffraction technique (TOFD) BS EN ISO 11666:2018 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels | PD CEN/TR 15135:2005 Welding. Design and non-destructive testing of welds BS EN ISO 15626:2018 Non-destructive testing of welds. Time-of-flight diffraction technique (TOFD). Acceptance levels BS EN ISO 17635:2016 Non-destructive testing of welds. General rules for metallic materials BS EN ISO 17636-2:2022 Non-destructive testing of welds. Radiographic testing. X- and gamma ray techniques with digital detectors BS EN ISO 17637:2016 Non-destructive testing of welds. Visual testing of fusion-welded joints BS EN ISO 17638:2016 Non-destructive testing of welds. Magnetic particle testing BS EN ISO 17640:2018 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels and assessment BS EN ISO 17643:2015 Non-destructive testing of welds. Eddy current examination of welds by complex plane analysis BS EN ISO 20601:2018 Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology for thin-walled steel components BS EN ISO 22825:2017* Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys BS EN ISO 23277:2015 Non-destructive testing of welds. Penetrant testing. Acceptance levels BS EN ISO 23278:2015 Non-destructive testing of welds. Magnetic particle testing. Acceptance levels BS EN ISO 23279:2017* Non-destructive testing of welds. Ultrasonic testing. Characterization of discontinuities in welds BS EN ISO 9016:2022 Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination | |
| ↑ Back to the top | ||
Some of the standards listed are under review and may be revised in due course. These are indicated with an asterisk, thus *.
| 2.2 Non-destructive testing of castings | ||
| BS EN 1369:2012* Founding. Magnetic particle testing BS EN 1370:2011* Founding. Examination of surface condition BS EN 1371-1:2011* Founding. Liquid penetrant testing. Sand, gravity die and low-pressure die castings BS EN 1371-2:2015 Founding. Liquid penetrant testing. Investment castings BS 2737:1956 Terminology of internal defects in castings as revealed by radiography BS ISO 4986:2020 Steel and iron castings. Magnetic particle testing BS ISO 4987:2020 Steel and iron castings. Liquid penetrant testing BS ISO 4992-2:2020 Steel castings. Ultrasonic testing. Steel castings for highly stressed components | BS 7730:1994* (ISO 9583:1993) Method for liquid penetrant inspection of metallic surgical implants BS 7731:1994* (ISO 9584:1993*) Method for radiographic examination of cast metallic surgical implants BS EN 12680-1:2003* Founding. Ultrasonic examination. Steel castings for general purposes BS EN 12680-2:2003* Founding. Ultrasonic examination. Steel castings for highly stressed components BS EN 12680-3:2011* Founding. Ultrasonic testing. Spheroidal graphite cast iron castings BS EN 12681-1:2017* Founding. Radiographic testing. Film techniques BS EN 12681-2:2017* Founding. Radiographic testing. Techniques with digital detectors | |
| ↑ Back to the top | ||
Some of the standards listed are under review and may be revised in due course. These are indicated with an asterisk, thus *.
| 2.3 Non-destructive testing of forgings, plate and tubes | ||
| BS M 36:1970 Method for ultrasonic testing of special forgings by an immersion technique using flat-bottomed holes as a reference standard BS 4HR 100:2010 + A1:2012 Aerospace series. Procedure for inspection, testing and acceptance of wrought heat-resisting alloys BS 5T 100:2010 Aerospace series. Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock BS EN 2950:2008 Aerospace series. Test method. Wrought heat resisting alloys. Semifinished products and parts. Conditions for macrographic and micrographic examination. Atlas of structures and defects BS 5138:1974 Specification for magnetic particle flaw inspection of finished machined solid forged and drop stamped crankshafts BS 8562:2011 Gas cylinders. In situ, non-destructive examination and testing of refillable seamless steel tubes of water capacity between 150 L and 3000 L, used for compressed gases. Specification BS EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) BS EN 10228-1:2016* Non-destructive testing of steel forgings. Magnetic particle inspection BS EN 10228-2:2016* Non-destructive testing of steel forgings. Penetrant testing BS EN 10228-3:2016* Non-destructive testing of steel forgings. Ultrasonic testing of ferritic or martensitic steel forgings BS EN 10228-4:2016* Non-destructive testing of steel forgings. Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings BS EN 10306:2002 Iron and steel. Ultrasonic testing of H-beams with parallel flanges and IPE beams BS EN 10308:2002 Non-destructive testing. Ultrasonic testing of steel bars BS ISO 10332:2010* Non-destructive testing of steel tubes. Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness BS EN ISO 10893-1:2011 + A1:2020 Non-destructive testing of steel tubes. Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leak-tightness | BS EN ISO 10893-2:2011 + A1:2020 Non-destructive testing of steel tubes. Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections BS EN ISO 10893-3:2011 + A2:2020 Non-destructive testing of steel tubes. Automated full peripheral flux leakage testing of seamless and welded (except submerged arcwelded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections BS EN ISO 10893-4:2011* Non-destructive testing of steel tubes. Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections BS EN ISO 10893-5:2011* Non-destructive testing of steel tubes. Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections BS EN ISO 10893-6:2019 Non-destructive testing of steel tubes. Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections BS EN ISO 10893-7:2019 Non-destructive testing of steel tubes. Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections BS EN ISO 10893-8:2011 + A1:2020 Non-destructive testing of steel tubes. Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections BS EN ISO 10893-9:2011 + A1:2020 Non-destructive testing of steel tubes. Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes BS EN ISO 10893-10:2011 + A1:2020 Non-destructive testing of steel tubes. Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections BS EN ISO 10893-11:2011 + A1:2020 Non-destructive testing of steel tubes. Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections BS EN ISO 10893-12:2011 + A1:2020* Non-destructive testing of steel tubes. Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes BS ISO 17577:2016 Steel. Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm | |
| ↑ Back to the top | ||
Some of the standards listed are under review and may be revised in due course. These are indicated with an asterisk, thus *.
| 2.4 Coating thickness measurement | ||
| BS M 40:1972 Methods for measuring coating thickness by non-destructive testing BS EN ISO 2128:2010* Anodising of aluminium and its alloys. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope BS EN ISO 2178:2016 Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method BS EN ISO 2360:2017* Non-conductive coatings on non-magnetic electrically conductive base metals. Measurement of coating thickness. Amplitude-sensitive eddy current method | BS EN ISO 2361:1995* Electrodeposited nickel coatings on magnetic and non-magnetic substrates. Measurement of coating thickness. Magnetic method BS EN ISO 3543:2001* Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method BS EN ISO 3882:2003* Metallic and other inorganic coatings. Review of methods of measurement of thickness BS EN 14571:2005* Metallic coatings on non-metallic basis materials. Measurement of coating thickness. Microresistivity method | |
| ↑ Back to the top | ||
Some of the standards listed are under review and may be revised in due course. These are indicated with an asterisk, thus *.
| 2.5 Brazed joints | ||
| BS EN 12799:2000* Brazing. Non-destructive examination of brazed joints | ||
| ↑ Back to the top | ||
Some of the standards listed are under review and may be revised in due course. These are indicated with an asterisk, thus *.
| 2.6 Non-destructive testing of concrete | ||
| BS 1881-204:1988 Testing concrete. Recommendations on the use of electromagnetic covermeters BS 1881-206:1986 Testing concrete. Recommendations for determination of strain in concrete ISO 1920-7:2004 Testing of concrete. Non-destructive tests on hardened concrete | BS EN 12504-2:2021 Testing concrete in structures. Non-destructive testing. Determination of rebound number BS EN 12504-4:2021 Testing concrete in structures. Determination of ultrasonic pulse velocity BS EN 13863-1:2003 Concrete pavements. Test method for the determination of the thickness of a concrete pavement by survey method | |
| ↑ Back to the top | ||
