| | BS, EN, BS EN and BS ISO
| ISO/BS
|
Overview
| | BS 5228-1:2009 Code of practice for noise and vibration control on construction and open sites – Part 2: Noise
|
| | BS 5228-2:2009 Code of practice for noise and vibration control on construction and open sites – Part 2: Vibration
|
| | BS 6472-1:2008 Guide to evaluation of human exposure to vibration in buildings – Part 1: Vibration sources other than blasting
|
| BS EN ISO 10846-2:2008 Acoustics and vibration – Laboratory
measurement of vibro-acoustic transfer properties of resilient elements –
Part 2: Direct method for determination of the dynamic stiffness of
resilient supports for translatory motion
|
| BS EN ISO 10846-3:2002 Acoustics and vibration – Laboratory
measurement of vibro-acoustic transfer properties of resilient elements –
Part 3: Indirect method for determination of the dynamic stiffness of
resilient supports for translatory motion
|
| BS EN ISO 10846-4:2003 Acoustics and vibration – Laboratory
measurement of vibro-acoustic transfer properties of resilient elements –
Part 4: Dynamic stiffness of elements other than resilient supports for
translatory motion
|
| BS EN ISO 10846-5:2008 Acoustics and vibration – Laboratory
measurement of vibro-acoustic transfer properties of resilient elements –
Part 5: Driving point method for determination of the low frequency
transfer stiffness of resilient supports for translatory motion
|
| BS EN ISO 13090-1:1998 Mechanical vibration and shock – Guidance
on safety aspects of tests and experiments with people – Part 1:
Exposure to whole-body mechanical vibration and repeated shock
|
| BS EN ISO 5349-1:2001 Mechanical vibration – Measurement and evaluation of human exposure to hand-transmitted vibration – Part 1: General guidelines
|
| BS EN ISO 6807:2003 Rubber hoses and hose assemblies for rotary drilling and vibration applications – Specifications |
| | BS ISO 10816-1:1995 + (Amd 1:2009) Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – Part 1: General guidelines
|
| | BS ISO 10816-2:2009 Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
|
| | BS ISO 10816-21:2015 Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – Part 21: Horizontal axis wind turbines with gearbox
|
| | BS ISO 10816-3:2009 + (Amd 1) Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
|
| | BS ISO 10816-4:2009 + (Amd 1) Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – Part 4: Gas turbine sets with fluid-film bearings
|
| | BS ISO 10816-5:2001 Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – Part 5: Machine sets in hydraulic power generating and pumping plants
|
| | BS ISO 10816-6:1995 + (Amd 1:2015) Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – Part 6: Reciprocating machines with power ratings above 100 kW
|
| | BS ISO 10816-7:2009 Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
|
| | BS ISO 10816-8:2014 + (Amd 1) Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – Part 8: Reciprocating compressor systems
|
| | BS ISO 10817-1:1998 Rotating shaft vibration measuring systems – Part 1: Relative and absolute sensing of radial vibration
|
| | BS ISO 10819:2013 Mechanical vibration and shock – Hand-arm vibration – Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
|
| | BS ISO 10846-1:2008 Acoustics and vibration – Laboratory measurement of vibro-acoustic transfer properties of resilient elements – Part 1: Principles and guidelines
|
| | BS ISO 13091-1:2001 + (Amd 1:2010) Mechanical vibration – Vibrotactile perception threshold for the assessment of nerve dysfunction – Part 1: Test methods for measurement at the fingertips
|
| | BS ISO 13373-1:2002 Condition monitoring and diagnostics of machines – Vibration condition monitoring – General procedures
|
| | BS ISO 13373-2:2016 Condition monitoring and diagnostics of machines – Vibration condition monitoring – Processing, analysis and presentation of vibration data
|
| | BS ISO 13373-3:2015 Condition monitoring and diagnostics of machines – Vibration condition monitoring – Part 3: Guidelines for vibration diagnosis
|
| | BS ISO 14694:2003 + (Amd 1:2011) Industrial fans – Specification for balance quality and vibration levels
|
| | BS ISO 14837-1:2005 Mechanical vibration – Ground-borne noise and vibration arising from rail systems – General guidance
|
| | BS ISO 14839-2:2004 Mechanical vibration – Vibration of rotating machinery equipped with active magnetic bearings – Evaluation of vibration
|
| | BS ISO 14839-3:2006 Mechanical vibration – Vibration of rotating machinery equipped with active magnetic bearings – Evaluation of stability margin
|
| | BS ISO 14839-4:2012 Mechanical vibration – Vibration of rotating machinery equipped with active magnetic bearings – Part 4: Technical guidelines
|
| | BS ISO 14963:2003 Mechanical vibration and shock – Guidelines for dynamic tests and investigations on bridges and viaducts
|
| | BS ISO 15230:2007 Mechanical vibration and shock – Coupling forces at the machine-man interface for hand-transmitted vibration
|
| | BS ISO 15242-1:2015 Rolling bearings – Measuring methods for vibration – Part 1: Fundamentals
|
| | BS ISO 16063-1:1998 Methods for the calibration of vibration and shock transducers – Part 1: Basic concepts
|
| | BS ISO 16587:2004 Mechanical vibration and shock – Performance parameters for condition monitoring of structures
|
| | BS ISO 18431-1:2005 + (Cor 1:2009) Mechanical vibration and shock – Signal processing – Part 1: General introduction
|
| | BS ISO 18436-2:2014 Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel – Vibration condition monitoring and diagnostics
|
| | BS ISO 18436-3:2012 Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel – Requirements for training bodies and the training process
|
| | BS ISO 18437-1:2012 Mechanical vibration and shock – Characterization of the dynamic mechanical properties of visco-elastic materials – Part 1: Principles and guidelines
|
| | BS ISO 18649:2004 Mechanical vibration – Evaluation of measurement results from dynamic tests and investigations on bridges
|
| | BS ISO 1940-1:2003 + (Cor 1:2005) Mechanical vibration – Balance quality requirements for rotors in a constant (rigid) state – Part 1: Specification and verification of balance tolerances
|
| | BS ISO 2017-2:2007 Mechanical vibration and shock – Resilient mounting systems – Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
|
| | BS ISO 2017-3:2015 Mechanical vibration and shock – Resilient mounting systems – Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
|
| | BS ISO 20283-2:2008 Mechanical vibration – Measurement of vibration on ships – Part 2: Measurement of structural vibration on ships
|
| | BS ISO 21940-12:2016 Mechanical vibration – Rotor balancing – Part 12: Procedures and tolerances for rotors with flexible behaviour
|
| | BS ISO 21940-14:2012 Mechanical vibration – Rotor balancing – Part 14: Procedures for assessing balance errors
|
| | BS ISO 21940-23:2012 Mechanical vibration – Rotor balancing – Part 23: Balancing machines – Enclosures and other protective measures for the measuring station
|
| | BS ISO 21940-31:2013 Mechanical vibration – Rotor balancing – Part 31: Susceptibility and sensitivity of machines to unbalance
|
| | BS ISO 2631-1:1997 + (Amd 1:2010) Mechanical vibration and shock – Evaluation of human exposure to whole body vibration – Part 1: General requirements
|
| | BS ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity
|
| | BS ISO 4866:2010 Mechanical vibration and shock – Vibration of fixed structures – Guidelines for the measurement of vibrations and evaluation of their effects on structures
|
| | BS ISO 5007:2003 Agricultural wheeled tractors – Operator's seat – Laboratory measurement of transmitted vibration
|
| | BS ISO 6954:2000 Mechanical vibration and shock – Guidelines for the measurement, reporting and evaluation of vibration in merchant ships
|
| | BS ISO 7919-1:1996 Mechanical vibration of non-reciprocating machines – Measurements on rotating shafts and evaluation criteria – General guidelines
|
| | BS ISO 8568:2007 Mechanical shock – Testing machines – Characteristics and performance
|
| | ISO 10137:2007 Ed 2 Bases for design of structures – Serviceability of buildings and walkways against vibration
|
| | ISO 13091-2:2003 Mechanical vibration – Vibrotactile perception threshold for the assessment of nerve dysfunction – Part 2: Analysis and interpretation of measurements at the fingertips
|
| | ISO 13355:2001 Packaging – Complete, filled transport packages and unit loads – Vertical random vibration test
|
| | ISO 16063-17:2016 Methods for the calibration of vibration and shock transducers – Part 17: Primary calibration by centrifuge
|
| | ISO 5982:2001 Ed 2 Vibration and shock – Mechanical driving point impedance of the human body
|
| | ISO 6267:1980 Alpine skis – Measurement of bending vibrations
|
| | ISO 9996:1996 Mechanical vibration and shock – Disturbance to human activity and performance – Classification
|
| | ISO/TR 25398:2006 Ed 1 Whole body vibration of earth-moving machinery
|
| | ISO/TS 15694:2004 Ed 1 Mechanical vibration and shock – Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system
|
| | PD ISO/TR 10687:2012 Mechanical vibration – Description and determination of seated postures with reference to whole-body vibration
|
| | PD ISO/TR 19201:2013 Mechanical vibration – Methodology for selecting appropriate machinery vibration standards
|
| | PD ISO/TR 27609:2007 Vibration in hand-held tools – Vibration measurement methods for grinders – Evaluation of round-robin test
|
| | PD ISO/TS 14837-32:2015 Mechanical vibration – Ground-borne noise and vibration arising from rail systems – Part 32: Measurement of dynamic properties of the ground
|
Applications
|
| BS EN ISO 5349-2:2001 Mechanical vibration – Measurement and
evaluation of human exposure to hand-transmitted vibration – Part 2:
Practical guidance for measurement in the workplace
|
| | BS ISO 5805:1997 Mechanical vibration and shock – Human exposure – Vocabulary
|
| | BS ISO 8727:1997 + (Amd 1:2015) Mechanical vibration and shock – Human exposure – Biodynamic coordinate systems - Amendment 1
|
| | ISO 2631-2:2003 Ed 2 (R08) Mechanical vibration and shock – Evaluation of human exposure to whole body vibration – Part 2: Vibration in buildings (1 Hz to 80 Hz)
|
Diagnostics & prognostics
| | BS ISO 18431-2:2004 + (Cor 1:2008) Mechanical vibration and shock – Signal processing – Part 2: Time domain windows for Fourier Transform analysis
|
| | BS ISO 18431-3:2014 Mechanical vibration and shock – Signal processing – Part 3: Methods of time-frequency analysis
|
| | BS ISO 18431-4:2007 Mechanical vibration and shock – Signal processing – Part 4: Shock response spectrum analysis
|
| | BS ISO 21289:2008 Mechanical vibration and shock – Parameters to be specified for the acquisition of vibration data
|
| | ISO 10811-1:2000 Ed 1 Mechanical vibration and shock – Vibration and shock in buildings with sensitive equipment – Part 1: Measurement and evaluation
|
| | ISO 10811-2:2000 Ed 1 Mechanical vibration and shock – Vibration and shock in buildings with sensitive equipment – Part 2: Classification
|
| | ISO 6070:1981 + (Cor 1:2006) Auxiliary tables for vibration generators – Methods of describing equipment characteristics
|
| | ISO 8528-9:1995 Reciprocating internal combustion engine driven alternating current generating sets – Part 9: Measurement and evaluation of mechanical vibrations
|
| | ISO 8608:1995 Mechanical vibration – Road surface profiles – Reporting of measured data
|
| | ISO 8626:1989 Servo-hydraulic test equipment for generating vibration – Method of describing characteristics
|
Equipment
|
| BS EN 60034-14:2004 + (A1:2007) Rotating Electrical
Machines – Mechanical vibration of certain machines with shaft heights
56mm and higher – Measurement, evaluation and limits of vibration
|
| | ISO 12680-1:2005 Methods of test for refractory products – Part
1: Determination of dynamic Young's modulus (MOE) by impulse excitation
of vibration
|
| | BS EN ISO 28927-1:2009 Hand-held portable power tools – Test method for evaluation of vibration emission Part 1: Angle and vertical grinders
|
| | BS EN ISO 28927-10:2011 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 10: Percussive drills, hammers and breakers
|
| | BS EN ISO 28927-11:2011 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 11: Stone hammers
|
| | BS EN ISO 28927-12:2012 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 12: Die Grinders
|
| | BS EN ISO 28927-2:2009 Hand-held portable power tools – Test method for evaluation of vibration emission Part 2: Wrenches, nut runners and screwdrivers
|
| | BS EN ISO 28927-3:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 3: Polishers and rotary, orbital and random orbital sanders
|
| | BS EN ISO 28927-4:2010 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Die grinders and straight grinders
|
| | BS EN ISO 28927-5:2009 + (Amd 1:2015) Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 5: Drills and impact drills
|
| | BS EN ISO 28927-6:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 6: Rammers
|
| | BS EN ISO 28927-7:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 7: Nibblers and shears
|
| | BS EN ISO 28927-8:2009 + (Amd 1:2015) Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action
|
| | BS EN ISO 28927-9:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 9: Scaling hammars and needle scalers
|
| | BS EN ISO 7096:2008 Earth-moving machinery – Laboratory evaluation of operator seat vibration
|
| | BS EN ISO 8041:2005 + (Cor 1:2007) Human response to vibration – Measuring instrumentation
|
| | BS ISO 10055:1996 Mechanical vibration – Vibration testing requirements for shipboard equipment and machinery components
|
| | BS ISO 10068:2012 Mechanical vibration and shock – Mechanical impedance of the human hand-arm system at the driving point
|
| | BS ISO 10326-2:2001 Mechanical vibration – Laboratory method for evaluating vehicle seat vibration – Part 2: Application to railway vehicles
|
| | BS ISO 10813-1:2004 + (Cor 1:2006) Vibration generating machines – Guidance for selection – Part 1: Equipment for environmental testing
|
| | BS ISO 11342:1998 Mechanical vibration – Methods and criteria for the mechanical balancing of flexible rotors
|
| | BS ISO 2017-1:2005 Mechanical vibration and shock – Resilient mounting systems – Technical information to be exchanged for the application of isolation systems
|
| | BS ISO 21940-13:2012 Mechanical vibration – Rotor balancing – Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors
|
| | BS ISO 21940-21:2012 Mechanical vibration – Rotor balancing – Part 21: Description and evaluation of balancing machines
|
| | BS ISO 21940-32:2012 Mechanical vibration – Rotor balancing – Part 32: Shaft and fitment key convention
|
| | BS ISO 22266-1:2009 Mechanical vibration – Torsional vibration of rotating machinery – Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
|
| | BS ISO 3046-5:2001 Reciprocating internal combustion engines – Performance – Part 5: Torsional vibrations
|
| | BS ISO 5008:2002 + (Cor 1:2005) Agricultural wheeled tractors and field machinery – Measurement of whole-body vibration of the operator
|
| | BS ISO 5348:2021 Mechanical vibration and shock – Mechanical mounting of accelerometers
|
| | BS ISO 7919-2:2009 Mechanical vibration – Evaluation of machine vibration by measurements on rotating shafts – Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
|
| | BS ISO 7919-3:2009 Mechanical vibration – Evaluation of machine vibration by measurements on rotating shafts – Part 3: Coupled industrial machines
|
| | BS ISO 7919-4:2009 Mechanical vibration – Evaluation of machine vibration by measurements on rotating shafts – Part 4: Gas turbine sets with fluid-film bearings
|
| | BS ISO 7919-5:2005 Mechanical vibration – Evaluation of machine vibration by measurements on rotating shafts – Machine sets in hydraulic power generating and pumping plants
|
| | ISO 10326-1:1992 + (Amd 1:2007) + (Amd 2:2011) Mechanical vibration – Laboratory method for evaluating vehicle seat vibration – Part 1: Basic requirements
|
| | ISO 3046-6:1990 Reciprocating internal combustion engines – Performance – Part 6: Overspeed protection
|
| | ISO 5347-22:1997 Methods for the calibration of vibration and shock pick-ups – Part 22: Accelerometer resonance testing – General methods
|
| | ISO 5347-7:1993 Methods for the calibration of vibration and shock pick-ups – Part 7: Primary calibration by centrifuge
|
| | ISO 7626-5:1994 Vibration and shock – Experimental determination of mechanical mobility – Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
|
| | ISO 8662-11:1999 + (Amd 1:2001) Hand-held portable power tools – Measurement of vibrations at the handle – Part 11: Fastener driving tools
|
| | PD ISO/TR 230-8:2010 Test code for machine tools – Part 8: Vibrations
|
Techniques
| | BS EN ISO 8318:2002 Packaging – Complete, filled transport packages – Vibration tests using a sinusoidal variable frequency
|
| | ISO 10227:1996 Human/human surrogate impact (single shock) testing and evaluation – Guidance on technical aspects
|
| | BS ISO 10815:1996 Mechanical vibration – Measurement of vibration generated internally in railway tunnels by the passage of trains
|
| | BS ISO 14695:2003 + (Cor 1:2009) Industrial fans – Method of measurement of fan vibration
|
| | BS ISO 14835-1:2016 Mechanical vibration and shock – Cold provocation tests for the assessment of peripheral vascular function – Part 1: Measurement and evaluation of finger skin temperature
|
| | BS ISO 14835-2:2005 Mechanical vibration and shock – Cold provocation tests for the assessment of peripheral vascular function – Part 2: Measurement and evaluation of finger systolic blood pressure
|
| | BS ISO 15242-2:2015 Rolling bearings – Measuring methods for vibration – Part 2: Radial ball bearings with cylindrical bore and outside surface
|
| | BS ISO 15242-3:2006 + (Cor 1:2010) Rolling bearings – Measuring methods for vibration – Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface
|
| | BS ISO 15242-4:2007 Rolling bearings – Measuring methods for vibration – Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
|
| | BS ISO 16063-11:1999 Methods for the calibration of vibration and shock transducers – Part 11: Primary vibration calibration by laser interferometry
|
| | BS ISO 16063-12:2002 + (Cor 1:2008) Methods for the calibration of vibration and shock transducers – Part 12: Primary vibration calibration by the reciprocity method
|
| | BS ISO 16063-13:2001 Methods for the calibration of vibration and shock transducers – Part 13: Primary shock calibration by laser interferometry
|
| | BS ISO 16063-15:2006 Methods for the calibration of vibration and shock transducers – Part 15: Primary angular vibration calibration by laser interferometry
|
| | BS ISO 16063-16:2014 Methods for the calibration of vibration and shock transducers – Part 16: Calibration by Earth's gravitation
|
| | BS ISO 16063-17:2016 Methods for the calibration of vibration and shock transducers – Part 17: Primary calibration by centrifuge
|
| | BS ISO 16063-21:2003 + (Cor 1:2009) + (Amd 1:2016) Methods for the calibration of vibration and shock transducers – Part 21: Vibration calibration by comparison to a reference transducer
|
| | BS ISO 16063-22:2005 + (Amd 1:2014) Methods for the calibration of vibration and shock transducers – Part 22: Shock calibration by comparison to a reference transducer
|
| | BS ISO 16063-31:2009 Methods for the calibration of vibration and shock transducers – Part 31: Testing of transverse vibration sensitivity
|
| | BS ISO 16063-41:2011 Methods for the calibration of vibration and shock transducers – Part 41: Calibration of laser vibrometers
|
| | BS ISO 16063-42:2014 Methods for the calibration of vibration and shock transducers – Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
|
| | BS ISO 16063-43:2015 Methods for the calibration of vibration and shock transducers – Part 43: Calibration of accelerometers by model-based parameter identification
|
| | BS ISO 18312-1:2012 Mechanical vibration and shock – Measurement of vibration power flow from machines into connected support structures – Part 1: Direct method
|
| | BS ISO 18312-2:2012 Mechanical vibration and shock – Measurement of vibration power flow from machines into connected support structures – Part 2: Indirect method
|
| | BS ISO 18437-2:2005 + A1:2010 Mechanical vibration and shock – Characterisation of the dynamic mechanical properties of visco-elastic materials – Resonance method
|
| | BS ISO 18437-3:2005 + A1:2010 Mechanical vibration and shock – Characterisation of the dynamic mechanical properties of visco-elastic materials – Cantilever shear beam method
|
| | BS ISO 19499:2007 Mechanical vibration – Balancing – Guidance on the use and application of balancing standards
|
| | BS ISO 20283-3:2006 Mechanical vibration – Measurement of vibration on ships – Part 3: Pre-installation vibration measurement of shipboard equipment
|
| | BS ISO 20283-4:2012 + (Amd 1:2014) Mechanical vibration – Measurement of vibration on ships – Part 4: Measurement and evaluation of vibration of the ship propulsion machinery
|
| | BS ISO 2631-4:2001 + (Amd 1:2010) Mechanical vibration and shock – Evaluation of human exposure to whole-body vibration – Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
|
| | BS ISO 4548-7:2012 Methods of test for full-flow lubricating oil filters for internal combustion engines – Part 7: Vibration fatigue test
|
| | BS ISO 5344:2004 Electrodynamic test equipment for generating vibration – Methods of describing equipment characteristics
|
| | BS ISO 7626-2:2015 Mechanical vibration and shock – Experimental determination of mechanical mobility – Part 2: Measurements using single-point translation excitation with an attached vibration exciter
|
| | DD ISO/TS 7849-1:2009 Acoustics – Determination of airborne sound power levels emitted by machinery using vibration measurement – Part 1: Survey method using a fixed radiation factor
|
| | DD ISO/TS 7849-2:2009 Acoustics – Determination of airborne sound power levels emitted by machinery using vibration measurement – Part 2: Engineering method including determination of the adequate radiation factor
|
| | ISO 22867:2011 Forestry and garden machinery – Vibration test code for portable hand-held machines with internal combustion engine – Vibration at the handles
|
| | ISO 2631-5:2004 Mechanical vibration and shock – Evaluation of human exposure to whole-body vibration – Part 5: Method for evaluation of vibration containing multiple shocks
|
| | ISO 2671:1982 Environmental tests for aircraft equipment – Part 3.4: Acoustic vibration
|
| | ISO 5347-12:1993 Methods for the calibration of vibration and shock pick-ups – Part 12: Testing of transverse shock sensitivity
|
| | ISO 5347-13:1993 Methods for the calibration of vibration and shock pick-ups – Part 13: Testing of base strain sensitivity
|
| | ISO 16063-32:2016 Methods for the calibration of vibration and shock transducers – Part 32: Resonance testing – Testing the frequency and the phase response of accelerometers by means of shock excitation
|
| | ISO 5347-15:1993 Methods for the calibration of vibration and shock pick-ups – Part 15: Testing of acoustic sensitivity
|
| | ISO 5347-16:1993 Methods for the calibration of vibration and shock pick-ups – Part 16: Testing of mounting torque sensitivity
|
| | ISO 5347-17:1993 Methods for the calibration of vibration and shock pick-ups – Part 17: Testing of fixed temperature sensitivity
|
| | ISO 5347-18:1993 Methods for the calibration of vibration and shock pick-ups – Part 18: Testing of transient temperature sensitivity
|
| | ISO 5347-19:1993 Methods for the calibration of vibration and shock pick-ups – Part 19: Testing of magnetic field sensitivity
|
| | ISO 8002:1986 Mechanical vibrations – Land vehicles – Method for reporting measured data
|
| | ISO 9688:1990 Mechanical vibration and shock – Analytical methods of assessing shock resistance of mechanical systems – Information exchange between suppliers and users of analyses
|
Terminology
| | BS ISO 14839-1:2002 + (Amd 1:2010) Mechanical vibration – Vibration of rotating machinery equipped with active magnetic bearings – Part 1: Vocabulary
|
| | BS ISO 15261:2004 Vibration and shock generating systems – Vocabulary
|
| | BS ISO 1925:2001 Mechanical vibration – Balancing – Vocabulary
|
| | BS ISO 2041:2018 Mechanical vibration, shock and condition monitoring – Vocabulary
|
| | BS ISO 7626-1:2011 Mechanical vibration and shock – Experimental determination of mechanical mobility – Part 1: Basic terms and definitions, and transducer specifications
|
| | ISO 8042:1988 Shock and vibration measurements – Characteristics to be specified for seismic pick-ups
|
