Penetrant Testing (РТ)
Non-destructive testing
Some of the standards listed are under review and may be revised in due
course. These are indicated with an asterisk, thus *.
| BS, EN, BS EN and BS ISO | ISO | |
| General provisions | BS EN ISO 3452-1:2013 Non-destructive testing – Penetrant testing – Part 1: General principles | ISO 3452-1:2013 Non-destructive testing – Penetrant testing – Part 1: General principles |
| BS EN ISO 3059:2012 Non-destructive testing – Penetrant testing and magnetic particle testing – Viewing conditions | ISO 3059:2012 Non-destructive testing – Penetrant testing and magnetic particle testing – Viewing conditions | |
| Special technique | BS EN ISO 3452-5:2008 Non-destructive testing – Penetrant testing – Part 5: Penetrant testing at temperatures higher than 50 degrees C | ISO 3452-5:2008 Non-destructive testing – Penetrant testing – Part 5: Penetrant testing at temperatures higher than 50 degrees C |
| BS EN ISO 3452-6:2008 Non-destructive testing – Penetrant testing – Part 6: Penetrant testing at temperatures lower than 10 degrees C | ISO 3452-6:2008 Non-destructive testing – Penetrant testing – Part 6: Penetrant testing at temperatures lower than 10 degrees C | |
| CEN/TR 16638:2014 Non-destructive testing – Penetrant and magnetic particle testing using blue light | ||
| Equipment and tools | BS EN ISO 3452-2:2013 Non-destructive testing – Penetrant testing – Part 2: Testing of penetrant materials | ISO 3452-2:2013 Non-destructive testing – Penetrant testing – Part 2: Testing of penetrant materials |
| BS EN ISO 3452-3:2013 Non-destructive testing – Penetrant testing – Part 3: Reference test-blocks | ISO 3452-3:2013 Non-destructive testing – Penetrant testing – Part 3: Reference test-blocks | |
| BS EN ISO 3452-4:1999 Non-destructive testing – Penetrant testing – Part 4: Equipment | ISO 3452-4:1998 Non-destructive testing – Penetrant testing – Part 4: Equipment | |
| Castings (c) | BS EN 1371-1:2011 Founding – Liquid penetrant testing – Part 1: Sand, gravity die and low pressure die castings | |
| BS EN 1371-2:2015 Founding – Liquid penetrant inspection – Part 2: Investment castings | ||
| ISO 4987:2010 Steel castings – Liquid penetrant inspection | ||
| Forgings (f) | BS EN 10228-2:2016* Non-destructive testing of steel forgings – Part 2: Penetrant testing | |
| Welds (w) | BS EN ISO 23277:2015 Non-destructive testing of welds – Penetrant testing of welds – Acceptance levels | ISO 23277:2015 Non-destructive testing of welds – Penetrant testing of welds – Acceptance levels |
| Tubes and pipes (t) | BS EN ISO 10893-4:2011 Non-destructive testing of steel tubes – Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections | ISO 10893-4:2011 Non-destructive testing of steel tubes – Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections |
| Terminology | BS EN ISO 12706:2009 Non-destructive testing – Penetrant testing – Vocabulary | ISO 12706:2009 Non-destructive testing – Penetrant testing – Vocabulary |
