Training Courses: Part Two
Level 2 Training
Courses listed below have been independently accredited as meeting specific criteria (generally outside the scope of PCN).
Note: Courses listed below have been designed to meet specific industrial requirements as defined by the course title. Each course is available only at the stated training organisation. Individuals and employers are advised to study in detail the course content to ensure that it adequately meets their requirements.
Note: Courses listed below have been designed to meet specific industrial requirements as defined by the course title. Each course is available only at the stated training organisation. Individuals and employers are advised to study in detail the course content to ensure that it adequately meets their requirements.
|
Training Organisation
& Contact Details
|
Method(s) |
| Argyll Ruane 4 Europa View, Sheffield Business Park Sheffield S9 1XH T: +44 (0)114 399 5720 T: +44 (0)7778 157459 Contact: Kristian Hampson E: kristian.hampson@argyllruane.com W: http://argyllruane.com | i) Acid etch inspection ii) Hardness testing iii) Conductivity testing iv) Ultrasonic testing of wrought plate including thickness gauging (ISO 20807) v) Anodic testing vi) MT rail upgrade vii) PT rail upgrade viii) 26 week NDT/inspection training programme ix) BGAS transition to PCN Weld Inspector level 2 x) Infrared thermography level 1 (SNT-TC-1A) |
| Aerospace Inspection Training (AIT) Ltd Units 9 & 10 Takeley Business Centre Dunmow Road Takeley Stansted Airport, Bishop’s Stortford, Essex CM22 6SJ T: +44 (0)1279 870276 Contact: Gary Jenkins Training Coordinator: Joanne Nair E: gary.jenkins@aerospacendt.co.uk E: admin@aerospacendt.co.uk E: joanne.nair@aerospacendt.co.uk W: www.aerospacendt.co.uk |
i) Infrared thermography (aero) ii) Acid etch inspection iii) Bond testing of structures using the Staverley Bondmaster iv) Ultrasonic phased array v) Computed radiography vi) Hardness testing vii) Conductivity testing viii) Andoic flaw detection |
| African NDT Centre (Pty) Ltd 21 Constantia Boulevard, Constantia Kloof, Roodepoort Johannesburg, South Africa 1709 Contact: Ismail Mahomed T: +27012 665 3248 E: ismail.mahomed@andtc.com | i) Magnetic particle testing ii) Liquid penetrant testing iii) Ultrasonic testing |
| C & D Access Ltd Unit 2B, Benton Business Park Bellway Industrial Estate, Whitley Road Newcastle-upon-Tyne NE12 9SA T: +44 (0)191 691 7300 Contact: Ana Gamarra Training Coordinator: Ana Gamarra E: ana.gamarra@cdais.co.uk | i) Ultrasonic testing of wrought plate including thickness gauging (ISO 20807) |
| International School of Aerospace NDT (ISA) Unit 2, Beech Avenue, Taverham Norwich NR8 6HW T: +44 (0)1603 260148 Contact: Samantha Wright Training Coordinator: Gary Jenkins E: samantha.wright@isandt.co.uk E: gary.jenkins@isandt.co.uk E: info@isandt.co.uk W: www.isandt.co.uk | i) Radiography ii) Ultrasonic testing iii) Eddy current testing iv) Magnetic particle testing v) Liquid penetrant testing vi) Infrared thermography vii) Bond testing |
| Lavender International NDT Unit 7, Penistone Station Sheffield S36 6HP T: +44 (0)1226 765769 Contact: Nicola Dodsley E: nic@lavender-ndt.com E: quality@lavender-ndt.com W: www.lavender-ndt.com | i) Eddy current testing of non-ferromagnetic tubes ii) Acid etch inspection iii) Hardness testing iv) Conductivity testing v) Anodic flaw testing vi) Composite materials (courses also available at TQCC/Lavender Greece) |
| NDE Institute of Trinidad Ltd 15 Robertson Street, Les Efforts East San Fernando, Trinidad W.I. T: (868) 653 9343 T: (868) 657 6572 Contact: Sonny James E: sjames@learnndt.com E: loriann.keane@gmail.com E: info@learnndt.com W: www.learnndt.com | i) Ultrasonic testing of wrought plate including thickness gauging (ISO 20807) |
| NDT Consultants Ltd Middlemarch House, Siskin Drive, Coventry CV3 4FJ T: +44 (0)24 7651 1151 Contact: Mike Reilly Training Coordinator: Mike Reilly E: mike@ndt-consultants.co.uk E: sales@ndt-consultants.co.uk W: www.ndt-consultants.co.uk | i) Acid etch inspection ii) Anodic flaw detection iii) Conductivity testing iv) Hardness testing v) Visual inspection vi) Coating thickness measurement vii) Bond testing |
| South West School of NDT Merton House, Croescadarn Close Pentwyn, Cardiff CF23 8HF T: +44 (0)2920 540000 Contact: Jonathan Coldman Training Coordinator: Stanley Elworthy E: jon.coldman@minton.co.uk E: stan.elworthy@minton.co.uk E: training@minton.co.uk W: www.swsndt.co.uk | i) Acid etch inspection ii) Hardness testing iii) Conductivity testing iv) Anodic testing v) Laser shearography (aero) vi) Infrared thermography (aero) |
| Taikoo (Xiamen) Aircraft Engineering Co Ltd Guandian Second Road, Huli District Xiamen 361006 T: (86) 592 5737 290 Contact: Lei Yue E: leiyue@haeco.com | i) Eddy current testing ii) Magnetic particle testing iii) Radiographic testing iv) Thermographic testing v) Liquid penetrant testing vi) Ultrasonic testing |
| TCS NDT 138 Hasler Road, Osborne Park, Perth Western Australia 6017 T: 08 9443 3412 Contact: Alisia Hewling Training Coordinator: Alisa Hewling E: alisa@tcsndt.com.au E: suzi@tcsndt.com.au E: bec@tcsndt.com.au W: www.tcsndt.com.au | i) Magnetic particle testing ii) Liquid penetrant testing iii) Eddy current testing iv) Ultrasonic testing |
| Testia Ltd Airbus Main Gate, Golf Course Lane, Building 07D Filton, Bristol BS 34 7QQ T: 01179 361242 Contact: Adnan Rahman Training Coordinator: Grayson Jones E: keith.phillips@testia.com E: grayson.jones@testia.com W: www.testia.com | i) Magnetic particle testing ii) Liquid penetrant testing iii) Radiography testing iv) Eddy current testing v) Ultrasonic testing |
| TQCC/Lavender Greece Z Pigis 51, 382 22 Volos, Greece T: +30 24210 59881 Contact: Athena Xirofotou Training Coordinator: Dimitrius G Pitteris E: info@tqcc.gr E: dpit@tqcc.gr W: www.tqcc.gr | i) UT castings (SNT) ii) RI/RT castings (SNT) |
| Tri Service School of NDT 71 (IR) Squadron, Building 716 RAF Wittering, Peterborough PE8 6HB T: +44 (0)1780 417912 Contact: Darren Allen-Exton Training Coordinator: Darren Allen-Exton Deputy Training Coordinator: Dan Lewis Deputy Training Coordinator: Mark Ellison E: darren.allen-exton561@mod.gov.uk E: daniel.lewis809@mod.gov.uk E: mark.ellison643@mod.gov.uk | i) 10 week aerospace NDT technicians course ii) Ultrasonic testing (aerospace) iii) Radiography (aerospace) iv) Magnetic particle testing (aerospace) v) Liquid penetrant testing (aerospace) vi) Eddy currenty testing (aerospace) vii) Basic radiation safety |
| TWI – Cambridge Granta Park, Abington, Cambridge CB21 6AL T: +44 (0)1223 899500 Contact: Michal Skerik E: michal.skerik@twi.co.uk E: trainexam@twitraining.co.uk W: www.twitraining.com | i) Ultrasonic testing of wrought plate including thickness gauging (ISO 20807) |
| TWI Technology and Training Centre (North East) Ferrous Road, Riverside Park, Middlesbrough TS2 1DJ T: +44 (0)1223 899500 Contact: Michal Skerik E: trainexam@twitraining.co.uk W: www.twitraining.com | i) Ultrasonic testing of wrought plate including thickness gauging (ISO 20807) |
| Xiamen United Technology Center Ltd Wu Han Building, 261 Jai He Lu, Building 1 Room 9C, Xiamen, R.R. China T: (86) 592-5083118 Contact: Raymond Ho E: utcraymond@vip.126.com | i) Radiography ii) Ultrasonic testing iii) Eddy current testing iv) Magnetic particle testing v) Liquid penetrant testing vi) Thermographic testing |
