Standards review
May 2025
Note: Sections 2 to 11 inclusive relate to non-destructive testing (NDT) and Sections 12 to 17 inclusive relate to condition monitoring (CM)…
| 1. General Standards (NDT) | ||||
| • ISO 17635:2025 Non-destructive testing of welds – General rules for metallic materials Published April 2025. | ||||
| 3. Eddy Current Testing (ET) (NDT) | ||||
| • ISO/CD 15548-1 Non-destructive testing – Equipment for eddy current examination – Part 1: Instrument characteristics and verification Draft DIS submitted 25.03.2025. | ||||
| 6. Radiographic Testing (RT) (NDT) | ||||
| • Fpr EN ISO 15708-3 Non-destructive testing – Radiation methods for computed tomography – Part 3: Operation and interpretation Ballot closed 01.05.2025. | ||||
| 7. Ultrasonic Testing (UT) (NDT) | ||||
| • FprEN ISO 16809 Non-destructive testing – Ultrasonic thickness determination For formal vote. FDIS ballot closed 26.04.2025. • FprEN ISO 16827 Non-destructive testing – Ultrasonic testing – Characterization and sizing of discontinuities For formal vote. FDIS ballot closes 06.05.2025. • FprEN ISO 16828 Non-destructive testing –Ultrasonic testing – Time-of-flight diffraction technique as a method for detection and sizing of discontinuities FDIS registered following formal DIS vote. | • FprEN ISO 16831 Non-destructive testing – Ultrasonic testing – Characterization and verification of ultrasonic equipment for the determination of thickness For formal vote. FDIS ballot closed 11.04.2025. | |||
| 17. General Standards (CM) | ||||
| • ISO 16079-1 Condition monitoring and diagnostics of wind turbines – Part 1: General guidelines Draft for public comment now in BSI standards development portal. Committee comments collated. • ISO/DIS 17934 Condition monitoring and diagnostics of machines – Reciprocating compressors April 2025: comments received following DIS ballot and under review. • ISO/DIS 18436-2 (Edition 3) Condition monitoring and diagnostics of machines – Requirements for training and certification of personnel – Part 2: Vibration condition monitoring and diagnostics GME/21/7 ballot on systematic review technical content closed 18.04.2025. Committee comments received. | • ISO 18436-3 (Edition 3) Condition monitoring and diagnostics of machines – Requirements for training and certification of personnel – Part 3: Requirements for training bodies and the training process Numerous comments arising post FDIS to be considered at 2025 meeting with potential for decision to revise. Ballot open. | |||
| There are currently no standards under review in the following sections: 2 (Acoustic Emission), 4 (Magnetic Particle Testing), 5 (Penetrant Testing), 8 (Visual Testing), 9 (Leak Testing), 10 (Infrared Thermographic Testing), 11 (Strain Gauge Testing), 12 (Vibration Condition Monitoring and Diagnostics), 13 (Lubricant Analysis), 14 (Acoustic Emission), 15 (Thermography) and 16 (Ultrasound). |
