PCN 2024 Document Download

 



The PCN Scheme has been undergoing a major review and relaunch following the issue of ISO 9712:2022. All new PCN24 Scheme documents are prefixed 'PCN24' and officially launch on 1 July 2024; however, there will be a phased introduction. Where new PCN24 documents have not yet been issued, the legacy documents should continue to be used.

Any concerns or queries should be forwarded to the Certification Services Department, which will endeavour to respond in good time:

Certification Manager: jennifer.cook@bindt.org
Technical enquiries: technical@bindt.org
PCN enquiries: pcn.enquiries@bindt.org
Audit enquiries: audits@bindt.org

 PCN24 – Document download – PSL
 PCN24/PSL04 Examination availabilityIssue 05October 2025
 PCN24/PSL18 Application for a duplicate PCN certificate Issue 01October 2024
 PCN24/PSL30 Log of industrial NDT experienceIssue 01April 2025
 PCN24/PSL31Use of the accreditation mark, the PCN logo and reference to PCNIssue 01March 2025
 PCN24/PSL33Verification of photograph and signature supplied for PCN
e-certification
Issue 01March 2025
 PCN24/PSL35Charges for Certification Services for 2025Issue 01January 2025
PCN24/PSL44Visual acuity and colour perception guidance documentIssue 01July 2025 
PCN24/PSL45 Use and misuse of PCN certificatesIssue 01October 2025
 PCN24/PSL49 PCN examination exemptionsIssue 01February
2025
 PCN24/PSL49A PCN acceptance of non-BINDT/ATO training Issue 01February
2025
 PCN24/PSL53Application to purchase individual certificates of NDT qualification suitable for framingIssue 01April 2025
 PCN24/PSL57AApplication of PCN examination (initial, recertification, retest, sector supplementary and extension to certification)Issue 01October 2025
PCN24/PSL57CPost-experience application: application for certification where experience is gained following examinationIssue 01April 2025
 PCN24/PSL60BINDT/PCN compliance with the Pressure Equipment (Safety) Regulations 2016: Guidance (GB) and European Pressure Equipment Directive 2014/68/EUIssue 01March 2025
 PCN24/PSL62PCN Level 1 and Level 2 recertification upon receipt of evidence of success in examinations conducted by Recognised Certification BodiesIssue 01June 2025
 PCN24/PSL66 BINDT-approved stamps for PCN certificate holdersIssue 02October 2025

 PCN24 – Document download – CP
PCN24/CP12 Transitional arrangements for the appointment of examiners – New or resurrected certification schemes or sectorsIssue 01May 2025
 PCN24/CP14Conformity assessment of ATOs, AQBs and quality management systemsIssue 03July
2025
 PCN24/CP16Renewal and recertification of PCN Level 1, 2 and 3 certificates
A PCN24/CP16 FAQ can be found here.
A presentation on the use of PCN24/CP16 can be found here.
Issue 03June
2025
 PCN24/CP19Informal access to BINDT Authorised Qualifying Bodies by third partiesIssue 01March 2025
 PCN24/CP21Procedure for complaints, falsification, cheating and appealsIssue 02March 2025
 PCN24/CP27 Code of Ethics for PCN certificate holdersIssue 01March 2025
 PCN24/CP28 Structured experience programme (fast-track experience)Issue 01July 2025

 PCN24 – Document download – General
 PCN24/GENGeneral requirements for qualification and PCN certification of NDT personnelIssue 02August 2025
 PCN24/GEN/AppendixZ1 NDT examination syllabi Issue 01February 2024 
 PCN24/GEN/APP/ETPCN certification eligibility and examination requirements for personnel engaged in non-destructive testing using the electromagnetic testing (ET) method at Levels 1, 2 and 3Issue 01July 2024
 PCN24/GEN/APP/MTPCN certification eligibility and examination requirements for persons engaged in non-destructive testing (NDT) using the magnetic particle testing (MT) method at Levels 1, 2 and 3Issue 02August 2025
 PCN24/GEN/APP/PTPCN certification eligibility and examination requirements for persons engaged in non-destructive testing using the penetrant testing (PT) method at Levels 1, 2 and 3Issue 02August 2025
 PCN24/GEN/APP/RTPCN certification and examination eligibility requirements for personnel engaged in non-destructive testing using the radiographic testing (RT) method at Levels 1, 2 and 3Issue 01May 2024
 PCN24/GEN/APP/UTPCN certification eligibility and examination requirements for personnel engaged in non-destructive testing using the ultrasonic testing (UT) method at Levels 1, 2 and 3Issue 02August 2025 
 PCN24/GEN/APP/VTPCN certification eligibility and examination requirements for persons engaged in non-destructive testing using the visual testing (VT) method at Levels 1, 2 and 3Issue 02August 2025
 PCN24/GEN/APP/WISpecific PCN requirements for the certification of personnel for weld inspectionIssue 01January 2025
 PCN24/SYL/DOC/RUTPCN training and examination syllabus document for: rail sector – Ultrasonic testing (RUT) rail track and rail axle testing at PCN Levels 1, 2 and 3Issue 01January 2025
 PCN24/SYL/WIPCN Syllabus – Welding inspection (WI) Issue 01January 2025

 PCN24 – Document download – Terms of reference
 PCN24/1Constitution, terms of reference and method of working of the Certification Management CommitteeIssue 01January 2025 
 PCN24/2Constitution, terms of reference and method of working of an Industry Sector Method Working Group CommitteeIssue 01January 2025
PCN24/3Constitution, terms of reference and method of working of the PCN Scheme Certification Technical CommitteeIssue 01January 2025
 PCN24/5Constitution, terms of reference and method of working of a BINDT certification/verification panel Issue 01January 2025 
 PCN24/9Constitution, terms of reference and method of working of the BINDT Outside Agency/Internal Agency Group (OA/IAG)Issue 02October 2025