Programme 5 September 2019

The International Centre, Telford, UK

Thursday 5 September
08.00	Registration – Exhibition Hall 3 Foyer Tea, Coffee and Exhibition – Exhibition Hall 3
09.15-09.45	Plenary Paper – The restoration of Merchant Navy-class 'Canadian Pacific' and an update on NDT requirements for heritage railway boilers R Peacock and Professor R A Smith, Mid Hants Railway Ltd Watercress Line, UK Chair: J Hansen, President of BINDT Room: Ironbridge 3
	Session 5A Ironbridge 3	Session 5B Wenlock 1 & 2	Session 5C Wenlock 3 & 4
	RCNDE Showcase: Optical and other methods Chair: Dr C MacLeod	Ultrasonics Chair: Professor A Croxford or Professor P Wilcox	Electromagnetics Chair: Professor A Peyton
09.45-10.05	[5A1] Characterisation of a structured light probe system designed for internal pipework inspection W Jackson¹, G Dobie¹, C MacLeod¹, F Caldwell¹ and C Forester² ¹University of Strathclyde, UK ²Inspection Hire, UK	[5B1] Development of standards for full matrix capture/total focusing method ultrasonic technique C Wassink¹ and D Chauveau² ¹Eddyfi Technologies, Canada ²Institut de Soudure, France	[5C1] Using ACFM to inspect high-temperature line welds M Smith Eddyfi Technologies, UK
10.05-10.25	[5A2] SH1 for high-resolution and accurate guided wave tomography mapping of corrosion at pipe supports A A E Zimmermann¹, P Huthwaite¹ and B Pavlakovic²¹Department of Mechanical Engineering, Imperial College UK ²Guided Ultrasonics Ltd, UK	[5B2] Inspection of irregularly shaped welds using adaptive TFM imaging O Roy, D Leitao and L Le Ber Eddify Technologies, France	[5C2] Improvements in the inspection of rail tank cars using ACFM M Smith¹, H Sadek² and C Meeker³ ¹Eddyfi Technologies, UK ²Eddyfi Technologies, USA ³Union Tank Car Company, USA
10.25-10.45	[5A3] Appraising near-surface material integrity using electrochemical jet processing A Speidel, I Bisterov, J Mitchell-Smith and A T Clare University of Nottingham, UK	[5B3] Multimode TFM imaging for weld inspection K Sy and O Roy Eddyfi Technologies, France	[5C3] Innovative development of NDT techniques for the inspection of high-temperature plant components A Shibli and D Robertson European Technology Development, UK
10.45-11.15	Tea and Coffee – Exhibition Hall 3
11.15-11.45	Plenary Paper – Changing 1000 small things – How we are working for diversity and inclusion in NDT K Kirk, Chair, BINDT Diversity and Inclusion Advisory Group Chair: J Hansen Room: Ironbridge 3
	Session 6A Ironbridge 3	Session 6B Wenlock 1 & 2	Session 6C Wenlock 3 & 4
	In-service inspection Chair: C Bull	Ultrasonics Chair: Professor A Croxford or Professor P Wilcox	Electromagnetics Chair: Professor A Peyton
11.45-12.05	[6A1] Inspection for corrosion at trunnion pipe supports H R Peramatzis¹ and C Scales² ¹ESR Technology, UK ²HSE, UK	[6B1] 2D and 3D ultrasound imaging of crack-like defects with a fast reconstruction algorithm in the Fourier domain S Robert¹, L Merabet¹, F Cartier¹ and C Prada² ¹CEA-LIST, France ²Institut Langevin, ESPCI Paris, France	[6C1] The high-voltage spark testing method for protective and functional dielectric coatings on a conductive substrate: increasing sensitivity and results reliability V A Syasko and A S Musikhin Constanta Ltd, Russia
12.05-12.25	[6A2] Inspection of corrosion under pipe supports (CUPS) S F Burch and H R Peramatzis ESR Technology, UK	[6B2] Benefits of PWI weld inspection for attenuative materials A Caulder¹, G Dao¹, N Laroche², E Carcreff², Z Xu² and D Braconnier² ¹Advanced OEM Solutions, USA ²The Phased Array Company, West Chester, USA C Thibault will present this paper	[6C2] Pulsed eddy currents for estimation of remaining ligament under steel corrosion scabs V Demers-Carpentier, M Rochette, S Champagne, D Deschatelets, M M Sisto and A Potvin Eddyfi Technologies, Canada L Rouff will present this paper
12.25-12.45	[6A3] Moisture detection imaging (MDI) for CUI inspection programs B Anderson Acuren Inspection, Texas	[6B3] Fully flexible thin-film ultrasonic array for use in industrial NDE applications B Rocks, D Irving, F Gaudenzi and D Allan Hughes Novosound Ltd, UK	[6C3] The use of the electrical potential drop method for the non-destructive determination of creep-induced damage in pressure vessel components at elevated temperatures A Wojcik¹, M Waitt², A Santos² and A Shibli³ ¹University College London, UK ²Matelect Ltd, UK ³European Technology Development, UK
12.45-13.05	[6A4] The methodology of wall thickness measurements using guided wave modes D Alleyne Guided Ultrasonics, UK K Vine will present this paper	[6B4] Simulation of ultrasonic phased array inspection of CANDU pressure tubes H Zhao, A Gachagan and G Dobie University of Strathclyde, UK E Mohseni will present this paper	[6C4] Simulation of eddy current testing of steam generator tubes with wear and secondary side magnetite deposits T Sollier¹, J M Decitre¹, A Vigneron² and E Demaldent² ¹IRSN, France ²CEA-LIST, France
13.05-13.25	[6A5] Unique challenges of performing NDE behind the reactor vessel lower internals thermal shield M Goodman WesDyne, Sweden M Bolander will present this paper	[6B5] Limitations and challenges of ultrasonic measurements in petroleum derivatives J H Kern, G Ptaszek, W Guo and V Seelan TWI, UK	[6C5] THIS SLOT IS AVAILABLE FOR A LATE SUBMISSION
13.25-13.45	[6A6] Quantitative electromagnetic measurements of in-service systems G Finch, R Guilizzoni and S Harmon National Physical Laboratory	[6B6] THIS SLOT IS AVAILABLE FOR A LATE SUBMISSION	[6C6] THIS SLOT IS AVAILABLE FOR A LATE SUBMISSION
13.45	Conference Close and Prize Award Ceremony – Exhibition Hall 3
13.55	Hot Lunch – Exhibition Hall 3