For the second year running, BINDT Corporate member Electrical Testing Ltd (ETL) has gained government approval as a registered apprenticeship provider, further cementing its commitment to the continued development of local people for local communities.
View the article
A new research report, titled: ‘Global Machine Condition Monitoring Market Report 2018’, provides actionable intelligence on factors that have been driving demand, key trends that are impacting the machine condition monitoring market, challenges that affect the market dynamics, along with the market size, and a strengths, weaknesses, opportunities and threats (SWOT) analysis of the key vendors and various segments.
View the article
In the railway industry, an important aspect is the aftermarket rail inspection for wear monitoring, recording and track-bed geometry. Donfabs & Consillia Ltd provides complete solutions for railway monitoring, producing a full range of equipment for the measurement of a wide variety of track parameters. The company’s product portfolio covers everything from unattended units for recording ride comfort, through to track parameter measurement and vehicles for rail inspection and maintenance.
View the article
National Instruments (NI), the provider of a software-defined platform that helps accelerate the development and performance of automated test and measurement systems, has released the latest version of SystemLink software. NI realises that managing configuration activities and data for a fleet of distributed test and measurement systems can be daunting, especially when the systems incorporate a variety of device configurations and software combinations. With the increasing number of distributed systems and the exponential growth of data, engineering teams must manage the disparities across these systems.
View the article
FLIR Systems has reported how researchers from the Microscale Thermophysics Laboratory at the University of Texas (Arlington, USA) are using FLIR thermal cameras to measure heat dissipation in three-dimensional integrated circuits (ICs).
View the article
Apprentices and employers who are already embracing the benefits of new apprenticeships in non-destructive testing (NDT) have spoken passionately to inspire other employers at the ‘Bridging the Skills Gap’ forum held on 15 May 2019.
View the article
Boeing has released a service letter with guidance on the use of 3D scanners for measuring dents and blends on aeroplanes. The SmartDENT 3D™ solution and the flagship HandySCAN 3D scanner were used in the process of guiding Boeing’s quality requirements for the service letter.
View the article
SKF has introduced the new-generation SKF Multilog On-line system IMx-16Plus, based on the proven new-generation SKF Multilog On-line system IMx-8, which allows condition-based maintenance to be integrated in applications that would previously have been too costly to consider.
View the article
Creaform, a worldwide leader in portable and automated 3D measurement solutions, has launched a thoroughly re-engineered Go!SCAN 3D™: the Go!SCAN SPARK™. This third-generation version of Creaform’s patented professional-grade Go!SCAN 3D portable 3D scanner has been specifically designed for product development professionals who need the most efficient portable scanner to capture the 3D data of physical objects anywhere.
View the article
FLIR Systems has published a technical note that discusses and compares the advantages of cooled versus uncooled optical gas imaging (OGI) technology for different industrial applications.
View the article
The Phased Array Company (TPAC), world-renowned experts in the field of ultrasonic non-destructive testing (NDT) solutions, has introduced the Pioneer, its new, powerful and compact acquisition unit providing the most innovative phased array (PA) and advanced full matrix capture (FMC)/total focusing method (TFM) technologies.
View the article
The European Network for Inspection and Qualification (ENIQ) is a network dealing with the reliability and effectiveness of non-destructive testing (NDT) for nuclear power plants (NPPs).
View the article
In 2014, the British Institute of Non-Destructive Testing (BINDT) collaborated with the Knowledge Transfer Network (KTN) and wider NDT and condition monitoring (CM) communities to create a report, titled: ‘A landscape for the future of NDT in the UK economy’.
View the article
Webtec, a specialist manufacturer of hydraulic measurement and control products, has unveiled the FlowHUB ViscoCorrect, an innovative and intelligent hydraulic flow monitoring device with integral temperature measurement and a large digital display, now for use in oils, water and water-based fluids.
View the article
Pexa, a leading supplier of aerospace-approved paints, coatings and surface treatment materials, has been present at the Paris Air Show since its start-up in 2002. In 2019, Pexa participated for the first time as a new member of the Addev Materials group of companies, following its acquisition in April as part of Addev’s acquisition of Graytone Ltd.
View the article
Quasset Test Facility (QTF) has opened in the Netherlands to facilitate the experimentation and validation of robotic solutions for inspection and maintenance. The 600 m2 testing facility offers a highly flexible and controlled environment, housing a range of decommissioned assets that serve to test crawling, flying and swimming robotic systems.
View the article
Eddyfi® Technologies has released Panther, which it claims is the ultimate ultrasound imaging machine. Panther comes with M2M’s state-of-the-art phased array ultrasonic testing (PAUT) and total focusing method (TFM) capabilities.
View the article
Heidenhain has introduced its Advanced Diagnostic System (ADS), which provides built-in encoder condition monitoring.
View the article
In May 2019, Guided Ultrasonics Ltd (GUL) acquired office facilities in Houston, Texas, USA, in order to better support its clients and partners within North America.
View the article
ABB’s new NiTemp non-invasive temperature sensor offers a simpler and safer way of measuring process temperature without the need to shut down a pipeline, drill a hole or install a thermowell. With its innovative double-sensor architecture and specially developed calculation algorithm, NiTemp greatly enhances safety and reduces installation costs without sacrificing the quality of the measurement.
View the article
FLIR Systems has launched the FLIR T840, a new thermal camera in the high-performance T-Series family. The high-resolution FLIR T840 offers a brighter display and an integrated viewfinder to help electric utility personnel, plant managers and other thermography professionals find and diagnose failing components in any lighting conditions, helping to avoid costly power outages and plant shutdowns.
View the article
Wireless power pioneer Nikola Labs is launching Vero, the perpetually powered equipment health monitoring system. An Industrial Internet of Things (IIoT) solution, Vero is an out-of-the-box system that allows manufacturers to closely monitor process-critical equipment.
View the article
The Engineering Equipment and Materials Users Association (EEMUA) has announced that Stuart Turner has been appointed Chair of the EEMUA Council, taking over from John Whitfield, who remains as Chair of the EEMUA Board.
View the article
The long-term development partnership of Schaeffler and Bonfiglioli, a market leader in yaw and pitch drives for wind turbines, has led to the creation of a compact Industry 4.0 solution package. Schaeffler has combined two of its proven measurement systems, SmartCheck and TorqueSense, to create a new condition and torque monitoring system.
View the article
Zetec Inc has announced an exclusive agreement with Structural Integrity Associates Inc to integrate and promote its Latitude™ non-mechanised probe position and orientation encoding technology with the Zetec Topaz® family of portable phased array ultrasonic testing (PAUT) instruments.
View the article
Wood has won a multi-million dollar contract to provide engineering and technical services to Hinkley Point C (HPC), the UK’s first new nuclear power station for more than 20 years.
View the article
